Pedrollo PKm60

The PEDROLLO PKm is a robust, reliable and economical pump used principally for water transfer in domestic and small scale water transfer applications. The pump body is made from cast iron with a brass insert set into the front housing for improved starting performance and protection from jamming. The impeller is made from brass.

The pumps feature the following benefits;

• Quiet operation due to the anti vibration system between shaft and impeller.
• More compact.
• More efficient motor with low energy consumption and lower operating temperature.
• Special paint which gives improved resistance against environmental corrosion.
• Extended life

Pumps can be installed for manual or automatic control using either the unique ‘Presscontrol’ unit or a pressure tank and switch. Also available is the integral ‘Hydrofresh’ version (Pkm60 only) which combines a 24L horizontal diaphragm tank, pressure switch and gauge with pressure settings of 1.4 Bar for pump start and 2.8 Bar for pump stop.

MOTOR
Pumps are close coupled to a TEFC brushless induction motor designed for continuous operation. A thermal relay is provided in the windings to protect against electrical and mechanical overload and the pump can be connected directly to the mains power supply through a 10amp fuse or MCB.

Enclosure Class:PKm60®:IPX4, PKm65: IP44
Voltage:1x240V
Insulation Class:F
Speed:2900rpm

OPERATING CONDITIONS
Pumped Liquid: Thin, clean, chemically non aggressive liquids without abrasive particles or fibres.
Max. Fluid Temperature: +60°C
Max. Ambient Temperature: +40°C
Max. Suction Lift: 7m (at sea level)

PUMP DATA