Back to Main Site
  • Pedrollo 0.37KW 3PH Submersible Motor

Pedrollo 0.37KW 3PH Submersible Motor

Available

Submersible Motor

Manufactured by Pedrollo

Pedrollo PD submersible motors are of the oil filled rewindable type designed to give exceptional reliability and efficiency in all borehole pumping applications. They are constructed principally from stainless steel AISI 316 making them robust and long lasting in harsh operating conditions.
Features include.

  • Oil-filled type motor with FDA approved colorless oil
  • Largely stainless steel AISI 316 construction with duplex shaft
  • Oil-lubricated thrust and radial bearings
  • Reinforced netted NBR diaphragm for internal motor pressure compensation
  • Standard NEMA flanges for use with both 4” and 6” pumps
  • Sacrificial anode available on request for 4PD for extremely aggressive water and stray currents

Protection: IP68
Insulation Class: F
Voltage: 4PD:1x220V/ 240V,50Hz/ 6PD:3x380V/ 415V,50Hz

OPERATING PARAMETERS
Max Voltage Variation: ±10%
Max Starts/Hr: 20 - 4” and 30 - 6”
Max Water Temperature: 35°C
Min Water Pass Flow Rate: 0.1m/sec
Max Immersion Depth: 200m
Installation: Vertical/horizontal with a tilt angle >5°

MOTOR DATA
SINGLE-PHASE

Power

In

(A)

Istart

(A)

PF

CosØ

CapacitorTail Cable H(mm) Weight(Kg) 
kWHPμFmm²m
0.370.53.6 120.8620 1.523117
0.550.754.7160.8925 3318
0.7515.9190.9135 3569
1.11.58.3270.9340 39611
1.5210.7350.936043713
2.2315.2470.947549215
Read More

Key Features


Read More

6,774 ZMW

Pedrollo 0.37KW 3PH Submersible Motor is Manufactured by Pedrollo

MPESA, Airtel Money, VISA & MasterCard

Delivery is within days

Warranty - Months

Pedrollo PD submersible motors are of the oil filled rewindable type designed to give exceptional reliability and efficiency in all borehole pumping applications. They are constructed principally from stainless steel AISI 316 making them robust and long lasting in harsh operating conditions.
Features include.

  • Oil-filled type motor with FDA approved colorless oil
  • Largely stainless steel AISI 316 construction with duplex shaft
  • Oil-lubricated thrust and radial bearings
  • Reinforced netted NBR diaphragm for internal motor pressure compensation
  • Standard NEMA flanges for use with both 4” and 6” pumps
  • Sacrificial anode available on request for 4PD for extremely aggressive water and stray currents

Protection: IP68
Insulation Class: F
Voltage: 4PD:1x220V/ 240V,50Hz/ 6PD:3x380V/ 415V,50Hz

OPERATING PARAMETERS
Max Voltage Variation: ±10%
Max Starts/Hr: 20 - 4” and 30 - 6”
Max Water Temperature: 35°C
Min Water Pass Flow Rate: 0.1m/sec
Max Immersion Depth: 200m
Installation: Vertical/horizontal with a tilt angle >5°

MOTOR DATA
SINGLE-PHASE

Power

In

(A)

Istart

(A)

PF

CosØ

CapacitorTail Cable H(mm) Weight(Kg) 
kWHPμFmm²m
0.370.53.6 120.8620 1.523117
0.550.754.7160.8925 3318
0.7515.9190.9135 3569
1.11.58.3270.9340 39611
1.5210.7350.936043713
2.2315.2470.947549215

Write a review

Note: HTML is not translated!
    Bad           Good